Create Config
Edit Name Description Configiration Type Type

Please Wait a Moment
X

Accessories and Fittings

Our interior steel soffit systems beneficially require few accessories and fittings in order to successfully complete the installation process. By only utilizing a handful of accessories and fittings, this minimizes necessary time and efforts to finish your project’s interior concealment needs. Please refer to the images and explanations of use below as you are becoming familiar with our interior soffit systems and their installation components.

Fasteners

We supply an array of fasteners in order to best suit each application. The type(s) utilized are determined by the individual requirements of each project and the site substrate(s). Fasteners necessary for your project may include one or more of the following:

Gypsum Board Substrate

  • #8 Screws (1 ¼”)
  • #10 Screws (1 ¼”)
  • Conical Anchors (Mollies)
  • ¼” Dia. x 3” Toggle Bolts
  • ZIP-ITS
  • Other options are available upon request

Concrete Substrate

  • Metal Hit Anchors (7/8”)
  • Metal Hit Anchors ( 2”)
  • ¼” Dia. x 1 ¼” Tapcons
  • ¼” Dia. x 1 ¾” Tapcons
  • Other options are available upon request

Security Fasteners

  • 1/8” Dia. Buttonhead White Head Rivets
  • 1/8” Dia. Buttonhead Stainless Steel Rivets
  • 3/16” Dia. Buttonhead Stainless Steel Rivets
  • #8 Self-tapping Security Screw (1”)
  • #10 Self-tapping Security Screw (1”)
  • Other options are available upon request

Shield Clips

Our shield clip is the primary hanging mechanism, serving to tightly secure the edge of our interior soffit systems to the substrate by creating a snap-lock connection. This unique design renders the shield virtually irremovable and tamper-resistant.

1 Inch Shield Clip

Our Standard (1”) Shield Clips are typically used in conjunction with installation of our Architectural, Aesthetic and Commercial soffit systems in 24, 22, and 20 Gauge Material. Sufficient for secure fastening of our lighter gauges to the substrate.

1 1/2 Inch Shield Clip

Our Institutional (1 ½”) Shield Clips were designed for applications involving installation of the Enforcer Security Soffit line in 18, 16 and 14 Gauge Material. Engineered to eliminate tampering possibilities, this shield clip provides proper attachment and support of our heaviest gauges

Couplings

Due to fabrication and shipping limitations, our interior soffit systems are offered in up to 10’ sections. However, most projects can commonly require longer runs of material. In order to address this need, we have developed a coupling, which simply acts as an internal seaming device allowing a stream-lined connection of two sections of our interior soffit systems to one another. Our couplings are available ‘loose’ for ultimate ease of field installation or pre-installed in a crimped or riveted manner. When working with our 20G and heavier material, or in the instance that your substrate is not square or level, simply use rivets to firmly anchor the coupling in place. This serves to help maintain a consistent, straight run throughout adjacent sections.

pinched-coupling

Riveted-Coupling

Wall Flanges

We’ve created a wall flange to additionally assure a secure installation of our system. This is an internal fitting that remains concealed upon anchoring the wall flange to a section of our interior soffit systems. Our wall flanges serve multiple uses and can aid in certain field fabrications. To provide further attachment security and remove the option of tampering, our wall flanges are used at those points in which the soffit material starts or stops at a substrate. Simply attach the wall flange to the substrate using the appropriate fasteners, and then slide the edge of the shield over the already attached wall flange. For additional security or to remedy any gaps, you may apply caulk or rivets. Please note: When ordering wall flanges for your L-Shield applications, you will need to indicate whether your project requires left and/or right hand wall flanges. Our U-Shield wall flanges are reversible. There are also applications in which it is necessary to create a ‘T-Intersection’ as required by the design of your mechanical systems. In these instances, a wall flange serves as the anchoring mechanism that connects one section of shield to the exterior surface of the adjoining section. While we offer the option to purchase factory-fabricated inside corners, outside corners and elbows, our wall flanges are used as a mechanism for field fabricating these ‘bends’ directly on the job site. The wall flange is used in the same manner as indicated to produce a T-Intersection. Should you opt for the more economical option of field-fabrication, you would require:

  • 2 – Wall Flanges = Inside Corner
  • 1 – Wall Flange, 1 – End Cap = Outside Corner
  • 1 – Wall Flange, 1 – End Cap = 90° Elbow

L-shield-Wall-Flanges

U-shield-Wall-Flange

End Caps

In the occasion your application leaves an exposed end, we supply an end cap which is designed to slide into and snuggly fit within the open end of the shield. Apply caulk or rivets for a secure installation.

End-Caps

Riveted-End-Cap

Inside Corners, Outside Corners & Elbows

At your option, we can factory fabricate any of the specialty ‘bends’ that your project may require. While electing this option advantageously saves you installation time, we do fabricate these bends at an exact 90° angle. This may pose problems as some substrates can have inconsistencies. See our section on wall flanges for a brief description relevant to field fabricating these bends.

Sealants

The type of color matched sealant utilized for finishing is determined by whether your project is an Architectural, Aesthetic, Commercial or Security Soffit application. Technical Data Sheets are available upon request.

  • Sonolastic NP1 – Recommended for finishing purposes of our Architectural, Aesthetic and Commercial Soffit Lines.
  • Sonolastic Ultra Caulk – For High security applications commonly required by when installing our Security Soffit Line.
  • DynaFlex SC- For High security applications commonly required by when installing our Security Soffit Line

L-Brackets

Our L-Brackets are an engineered solution for those situations in which asbestos or dropped tile ceilings are existing, project conditions. Our L-Bracket design ensures that the need for penetration into the asbestos can be avoided while still allowing a secure, stream-lined interior soffit system.

L-Bracket

Shield Clip Release Tool

This device has been specially designed to release the shield from its installed, irremovable state. Inserting the shield clip release tool between the cover and the shield clip allows enough flex to release the cover. However, please note it may be necessary to install new shield clips in locations where the cover has been removed. We strongly recommend examining the condition of shield clips before proceeding to re-install the shield cover. In most cases, the cover remains intact and it can be installed as it was originally. Please contact JG Innovations’ if a shield clip release tool is needed.